8 minutes reading time (1656 words)

Sparkling Water Still Life – Put some Fizz in your Photos

The post Sparkling Water Still Life – Put some Fizz in your Photos appeared first on Digital Photography School. It was authored by Rick Ohnsman.

sparkling water still life featured image - roses

Often the key to making a good photo is to show the commonplace in a whole new way. Bombarded by so many visual images each day, photo viewers need something that breaks the rules, that looks different to make them pause on your photo. This sparkling water still life technique will challenge your photo skills. It will teach you how to compose and light still life subjects, give you practice with editing tools and techniques, and help you create interesting images. Maybe best of all, you’ll have some fun.

Sparkling Water Still Life - 01Strongly backlit and filled with flash, these tulips were shot submerged in a vase of sparkling water. The image was flipped vertically in post-production. Canon 6D with Tamron 90mm f2.8macro lens – 1/20 sec. f/11 ISO 200

Perhaps another plus to this kind of photography (I write this holed up at home during isolation), is it can be done at home on the kitchen counter or wherever you like to work. You can then post your creation online, giving us all the enjoyment of viewing your image.

Shall we get started? Break out the bubbly!

Sparkling Water Still Life - 02Citrus slices make good subjects for this kind of photography as they look like they belong in sparkling water. Sliced thin, they are translucent, lending themselves to backlighting. Canon 6D with Tamron 90mm macro lens – Left – 1/4 sec. f/22 ISO 800 Right 1/30 sec. f/8 ISO 800Lighting sparkling water still life - 03This image was lit from below with an LED flashlight and from behind with a Lumecube Air.

What you’ll need

Sparkling water

You can use various kinds of carbonated waters or sodas (perhaps champagne if you’re feeling decadent). What you’re after are the bubbles. There are no rules here and so use what suits your vision.

For the images here, I found seltzer water well-suited to the purpose. It is crystal-clear, has good carbonation, and with no sugar added doesn’t leave a sticky mess when it comes time for cleanup.

sparkling water still life with colored pencilsThe colored pencils were taped together, clamped to the rectangular vase, and lit from below with an LED flashlight.

Glass container

What you use will depend on the image you’re trying to create. I found a rectangular glass vase with flat sides well-suited for the purpose. A small aquarium could work well.

Of course, if the subject and the theme you seek are different, wine or champagne glasses could work too. The only consideration here is to think about how the glass may distort anything placed inside it.

Sparkling water still life - various backgroundsEssentially the same shot, but substituting different color backgrounds for different looks. Canon 6D with Tamron 90mm macro lens – 1/10 sec. f/11 ISO 800

Subjects

There is no end to the items you might choose to submerge for a sparkling water still life photograph. I found that things that seem consistent with the theme to be good choices. The kinds of things one might find in a watery-bubbly environment.

Fruits and flowers can be good choices. You’ll also see I used shells and other aquatic items. Of course, other items with good color and interest become even more interesting covered with bubbles.

A quick dip into some science behind all of this – items with rougher surfaces, those with more nucleation sites where bubbles can form, can be more interesting. The flowers in my shots demonstrate this concept. Bubbles won’t form as easily on smoother, non-porous surfaces.

Sparkling Water Still Life - Put some Fizz in your PhotosThe surfaces of the roses and stem have many “nucleation sites” where the CO2 bubbles in the seltzer water can form. Canon 6D with Tamron 90mm macro lens – 1/30 sec. f/8 ISO 800

Cleanliness

Most often, you will be shooting close-up, very possibly with a macro lens, for this kind of photography. The smallest of items, scratches, and dirt on the glass container, dirt and other material suspended in the water and such, will all show up and perhaps even become places where bubbles might form.

You should scrupulously clean the container you will be using before you get started. Doing so will save you lots of time later trying to remove unwanted specks from your photo digitally.

Sparkling water still life - DifficultiesThese shots illustrate some difficulties you might have. The image on the left is straight out of camera. The slow shutter speed of 1/10th second was insufficient to freeze the motion of the bubbles leaving streaks. The starfish was buoyant and floated in the container which wasn’t large enough to allow it to fit fully in frame. The image at right is edited to remove some distractions, but this wasn’t going to be a keeper.
Canon 6D with Tamron 90mm macro lens – 1/10 sec. f/22 ISO 800

Setup

Using your cleaned container, place the subject(s) you want inside before adding any liquid. Consider whether the subjects will float. Even if they are just slightly buoyant, once they are covered with bubbles, they are apt to get some extra lift. Be ready with some clamps, wire, tape, or other means of keeping them submerged and where you want them.

Compose and frame your shot. Depending on the subject size and how close you need to be, you may find a macro lens is needed. Other alternatives could be extension tubes, close-up filters, or a reversed-lens.

If you don’t need to be as close, you might put your camera further away and zoom into the shot.

NOTE: Do all of this before adding the water to the container. The bubbles will dissipate with time and you don’t want that happening while you’re still setting up.

Sparkling Water Still Life - Put some Fizz in your PhotosDifferent containers will change the look of your subject, but the curved glass of this glass does distort the image the liquid in the submerged portion of the rose magnifies it making it seem larger than the above-water portion of the flower and the curve of the glass adds other distortions. Canon 6D with Tamron 90mm macro lens – 1/2 sec. f/20 ISO 800

Lighting considerations

Sparkling Water Still Life - Put some Fizz in your PhotosThis image shows lighting from below with a LED flashlight and from the front with a Lumecube Air.

This is a great opportunity to experiment with lighting sources and techniques.

Working in a glass container gives you the opportunity to light from almost any direction; top, bottom, front, back, left, right, or a combination of these. Whether you use flash, continuous lights, natural lighting, whatever you can come up with – it’s all up to you.

Definitely use this exercise as an opportunity to play and explore. Digital film is cheap. This shouldn’t be a one-and-done kind of shoot. Make lots of shots, exploring lighting placement, various apertures and shutter speeds, light modifiers, whatever you like.

Sparkling Water Still Life - Put some Fizz in your PhotosSame subject, front-lit on the left, back-lit on the right. Canon 6D with Tamron 90mm macro lens – 1/13 sec. f/22 ISO 800Sparkling Water Still Life - Put some Fizz in your PhotosSame image, different backgrounds. Experiment with different things! Canon 6D with Tamron 90mm macro lens – 1/10 sec. f/11 ISO 800

Backgrounds

The addition of bubbles to your subject will cause it to become a “busier” composition. Having a patterned background is apt to distract or overly complicate the image.

I find solid backgrounds, and often plain white or black to work best. (I’ll get into the advantages of those simple white or black backgrounds in a minute.) Again, this will depend on the look you are trying to achieve, but do give consideration to not only your subject but the background.

Sparkling Water Still Life - Put some Fizz in your Photos Canon 6D with Tamron 90mm macro lens – 1/13 sec. f/16 ISO 800

Editing and cleanup

I can almost guarantee your image will need some work in editing after the shoot. Simplifying and cleaning up things you don’t want will be necessary.

Adjusting highlights, shadows, white and black levels, and cloning out distractions will all improve your photo. Whatever your editing tools of choice might be, use this exercise as a means of teaching yourself more about what you can do and how to do it.

My tools of choice are Adobe Lightroom Classic and Photoshop.

Having a white or black background can help a lot in that with adjustments, the adjustment brush, the histogram highlight and shadow clipping tools, and the spot healing tool, I can often do whatever I need in Lightroom alone.

For tougher cloning or healing operations, I may escalate the edit into Photoshop.

Images with color backgrounds are apt to be more challenging. Again, use this exercise as a means of learning tools and techniques you might not have previously explored.

Sparkling Water Still Life - Put some Fizz in your PhotosWhen editing an image in Lightroom with a black or white background, you may purposely want to have the background go totally black or white. Turning on the highlight/shadow clipping tools will show 100% black (0,0,0) areas in a blue highlight, totally white (255,255,255) areas in red. The “J” key is the shortcut to toggle this off and on. You can then use the adjustment brush, automask, and other LR to “paint out” distracting elements.

Flip it

Often while making a sparkling water still life, your subject will be down in the liquid. Don’t overlook the simple ability to flip your image vertically during editing to put it in a more natural viewing position.

Have fun!

Maybe the biggest reason for this table-top photo exercise is it is fun. You will be amazed at how you can make otherwise simple subjects much more visually exciting with the addition of some bubbles and creative lighting when you make sparkling water still life photos.

So, if you have to stay home, why not find ways to creatively use your time to expand your photo skills and make some nice images?

Give it a try, post your creations in the comments section of this article and be well my friends.

The post Sparkling Water Still Life – Put some Fizz in your Photos appeared first on Digital Photography School. It was authored by Rick Ohnsman.

Original author: Rick Ohnsman
Facebook Announces Secure Transfer of Photos/Video...
Saving Your Print Layouts as JPEGs
 

By accepting you will be accessing a service provided by a third-party external to https://casite-257362.cloudaccess.net/

We meet every 2nd and 4th Thursday at:

Evelyn Greer Park (Pinecrest) 
8200 SW 124th Street 
Pinecrest, FL 33157

 

BACK TO TOP